Our New Forest Fencing Langely gates, with their curved top, and concave and board contrast, they make an attractive, traditional entrance – either as a double leaf entrance, or a single garden gate.
Our Langley gates are made to order and can be constructed using made in a premium softwood or a Sapele Hardwood known for it’s durability, strength a density.
At New Forest Fencing, we love it when our customers are inspired by new or unusual looks, so if you want to customise our designs in any way – for example by adding engravements, or contrasting with powder coated steel, we’re more than happy to help you relaise the look you’re after.
All of our gates can be complimented with automation and intercom, please enquire for more information.
The Langley is basically a matchboard gate with a Palisade infill, made from 70mm x 45mm PAR timber, with a mortice and tenon framework, and clad with 80mm x 16mm T.G.V. boards. This gate does not have a capping, but has a reduced height in the middle and a curved top rail.
The palisade uprights are morticed into the framework, at equal spacing’s and have a finished size of approx 50mm x 16mm on gates small to medium size gates, which we increase to approx 70mm wide on larger gates.
On gates over 1.2m wide each leaf, we increase the size of the framework to 95mm x 65mm at no extra cost.
Please note: When ordering these gates, we need to know the height from the bottom of the gate to the position where the Palisade starts at the hanging side as well as the difference in height between the outside hanging and the inside shutting stiles.
These gates should not be pressure treated, as they are made from Kiln dried Timber, which is stored dry and assembled in a dry workshop. It is important to realise that when this timber comes in contact with the elements, rain etc. it will take on the moisture and swell. This will be noticeable especially on the Tongue and groove boarding, which may distort the framework and try to force the gate apart at the joints.
Front View
Rear View
If you’d like to discuss your project in detail, leave your number and we’ll give you a call.
