Burley (Semi-Circle Arched Top)

The Burley is the same as our Exbury gate, a “matchboard gate” with a full or round top. It has a solid curved top rail, fixed at the back, but cannot be fitted with a capping. The height of the curve is usually, a true radius, but we need to know the height from the bottom of the gate to the position where the curve starts.

The Burley can be made in either left, or right hand hung, so please specify. We strongly advise that on any gate over 1.2M wide, we increase the framework size to 95mm x 45mm at an additional cost of 30%.

These gates should not be pressure treated, as they are made from Kiln dried Timber, which is stored dry and assembled in a dry workshop. It is important to realise that when this timber comes in contact with the elements, rain etc. it will take on the moisture and swell. This will be noticeable especially on the Tongue and groove boarding, which may distort the framework and try to force the gate apart at the joints.

For softwood gates, we strongly recommend an oil-based treatment, available in Pale green, Golden or Dark Brown at a square meter price, see our catalogue for current prices. We strongly advise the customer to provide at least a further two coats of stain, and to recoat it throughout the life of the product.

For Hardwood “Sapele” gates we strongly recommend a coat of Ronseal woodstain which is applied to all surfaces during the manufacturing process, see our catalogue for current prices. We can apply this in “Antique pine” which brings out the natural Sapele colour or “Teak” which will make a very dark colour. We strongly advise the customer to provide at least a further two coats of stain, and to recoat it throughout the life of the product.

Front View

Rear View

Get a Free Consultation

If you’d like to discuss your project in detail, leave your number and we’ll give you a call.

Search For Products